Super Duplex 2507 Buttweld Fittings, Alloy 2507 Threaded Bend Tube In Saudi Arabia, Super Duplex ASTM A815 UNS S32750 Fitting Cross,UNS S32750 Super Duplex Short Radius Elbow, UNS S32750 Super Duplex Hex Plus Supplier In Mumbai, India

UNS S32750 Super Duplex Short Radius Elbow, UNS S32750 Super Duplex Hex Plus In South Africa, Super Duplex ASTM B815 UNS S32750 Pipe Bend Pipe U In Usa, UNS S32750 Super Duplex Threaded Bend Coil Manufacturer In India.

By using the abilities of our accomplished experts, we at Online Metal India are manufacturing, exporting, and supplying a comprehensive range of Super Duplex Steel S32750 / S32760 Pipe Fittings, Super Duplex 2507 Buttweld Fittings to our valued customers worldwide.

Our product Super Duplex 2507 Elbow Pipe Fittings is designed to feature high strength, resistance to pitting, stress corrosion cracking.

Our Super Duplex S32760 Equal & Unequal & Lateral Tee Butt Weld Pipe Fittings is suited to a variety of applications in industries such as Chemical Processing, Oil & Gas, and Marine environments.

Super Duplex Stainless steel, which combines high strength and excellent corrosion resistance in many environments, has found applications in chemical and process industries. Pulp mills, offshore systems, flue gas desulphurization units. The localized corrosion resistance of Super-Duplex Steels is close to what is achieved with 6% Mo Super-Austenitic grades.

UNS S32750 | S32760, SUPER DUPLEX STEEL BUTTWELD FITTING SPECIFICATIONS

SUPER DUPLEX UNS S32750 / S32760 BUTTWELD FITTING CHEMICAL COMPOSITION

SPECIFICATION EQUIVALENTS :

• UNS: S32750, EN 1.4410
• UNS: S32760, EN 1.4501
• ASTM: A240, A480, A789, A790

SUPER DUPLEX STEEL S32750 / S32760 BUTTWELD FITTING MECHANICAL PROPERTIES

SUPER DUPLEX STEEL S32750 / S32760 BUTTWELD FITTING MECHANICAL PROPERTIES

• Super Duplex stainless steels exhibit a PREN value higher than 40.
• Combines the most desirable characteristics of both super-ferritic and Super-Austenitic steel.
• Has excellent resistance to chloride SCC, pitting, crevice, and general corrosion, and carbide-related inter-granular corrosion.
• Possesses high strength & impact strength.
• Has high thermal conductivity and a lower coefficient of thermal expansion compared to Super Austenitic steels.

FABRICABILITY :

• It should be hot worked in the range of 1250-1000 deg C, followed by a solution annealing at 1100 deg C and rapid quench.
• It can be cold formed using methods similar to those commonly used for Stainless Steel. The primary difference is that the high yield strength makes it necessary to have higher forming forces, increased radius of bending, and increased allowance for spring back.
• Deep drawing, stretch forming and similar processes are difficult to perform.

WELDABILITY :

• It possesses good weldability and can be welded to itself and other materials by Shielded Metal Arc Welding (SMAW), gas tungsten Arc Welding (GTAW), Plasma Arc Welding (PAW), or Submerged Arc Welding (SAW).
• Surfaces must be clean before welding.
• Preheating is not necessary, except to prevent condensation on cold metal.
• The recommended heat input should be nearly about 0.3-1.5K1/mm
• The interpass temperature should not exceed 150 deg C.
• The root should be shielded with commercial Ar or 90%N2 / 10%H2 purging gas for maximum corrosion resistance.

CORROSION RESISTANCE :

• It is highly resistant to carbide related inter-granular corrosion due to its low carbon content which lowers the
• risk of carbide precipitation at the grain boundaries during heat treatment. Its critical pitting temperature (CPT) is superior to that of 904L.
• It has excellent resistance to crevice corrosion and SCC,
• Extremely resistant to uniform corrosion by organic acids such as formic and acetic acid and also to inorganic acids, especially those containing chlorides.
• Excellent corrosion resistance against highly corrosive acids like Sulphuric, Nitric, Phosphoric acids.

APPLICATION :

• Oil and gas industry.
• Petrochemical industries ( polymerization reactor cycle pumps and pipework)
• Offshore platforms (heat exchangers, process and service water systems, fire-fighting systems, and injection and ballast water systems)
• Chemical process industries (heat exchangers and vessels)
• Desalination plants (high-pressure RO-plant and seawater piping)
• Fertilizers (Recirculation tanks, sedimentation tanks, phosphate reactor recirculation pumps)
• Power industry FGD systems
• Utility & industrial scrubber systems (absorber towers, ducting, piping)
• Mining/ Extraction ( hot slurry pipework, acid leach mining)
• Sewage (critically important pipelines.)
• Engineering applications (pressure vessels,)

OTHER TYPES OF SUPER DUPLEX STEEL (UNS S32750 | S32760) PIPE FITTINGS